Struct Char

Source
pub struct Char(pub u8);

Tuple Fields§

§0: u8

Implementations§

Source§

impl Char

Source

pub fn as_u8(&self) -> u8

Methods from Deref<Target = u8>§

1.43.0 · Source

pub const MIN: u8 = 0u8

1.43.0 · Source

pub const MAX: u8 = 255u8

1.53.0 · Source

pub const BITS: u32 = 8u32

1.23.0 · Source

pub fn is_ascii(&self) -> bool

Checks if the value is within the ASCII range.

§Examples
let ascii = 97u8;
let non_ascii = 150u8;

assert!(ascii.is_ascii());
assert!(!non_ascii.is_ascii());
Source

pub fn as_ascii(&self) -> Option<AsciiChar>

🔬This is a nightly-only experimental API. (ascii_char)

If the value of this byte is within the ASCII range, returns it as an ASCII character. Otherwise, returns None.

Source

pub unsafe fn as_ascii_unchecked(&self) -> AsciiChar

🔬This is a nightly-only experimental API. (ascii_char)

Converts this byte to an ASCII character, without checking whether or not it’s valid.

§Safety

This byte must be valid ASCII, or else this is UB.

1.23.0 · Source

pub fn to_ascii_uppercase(&self) -> u8

Makes a copy of the value in its ASCII upper case equivalent.

ASCII letters ‘a’ to ‘z’ are mapped to ‘A’ to ‘Z’, but non-ASCII letters are unchanged.

To uppercase the value in-place, use make_ascii_uppercase.

§Examples
let lowercase_a = 97u8;

assert_eq!(65, lowercase_a.to_ascii_uppercase());
1.23.0 · Source

pub fn to_ascii_lowercase(&self) -> u8

Makes a copy of the value in its ASCII lower case equivalent.

ASCII letters ‘A’ to ‘Z’ are mapped to ‘a’ to ‘z’, but non-ASCII letters are unchanged.

To lowercase the value in-place, use make_ascii_lowercase.

§Examples
let uppercase_a = 65u8;

assert_eq!(97, uppercase_a.to_ascii_lowercase());
1.23.0 · Source

pub fn eq_ignore_ascii_case(&self, other: &u8) -> bool

Checks that two values are an ASCII case-insensitive match.

This is equivalent to to_ascii_lowercase(a) == to_ascii_lowercase(b).

§Examples
let lowercase_a = 97u8;
let uppercase_a = 65u8;

assert!(lowercase_a.eq_ignore_ascii_case(&uppercase_a));
1.24.0 · Source

pub fn is_ascii_alphabetic(&self) -> bool

Checks if the value is an ASCII alphabetic character:

  • U+0041 ‘A’ ..= U+005A ‘Z’, or
  • U+0061 ‘a’ ..= U+007A ‘z’.
§Examples
let uppercase_a = b'A';
let uppercase_g = b'G';
let a = b'a';
let g = b'g';
let zero = b'0';
let percent = b'%';
let space = b' ';
let lf = b'\n';
let esc = b'\x1b';

assert!(uppercase_a.is_ascii_alphabetic());
assert!(uppercase_g.is_ascii_alphabetic());
assert!(a.is_ascii_alphabetic());
assert!(g.is_ascii_alphabetic());
assert!(!zero.is_ascii_alphabetic());
assert!(!percent.is_ascii_alphabetic());
assert!(!space.is_ascii_alphabetic());
assert!(!lf.is_ascii_alphabetic());
assert!(!esc.is_ascii_alphabetic());
1.24.0 · Source

pub fn is_ascii_uppercase(&self) -> bool

Checks if the value is an ASCII uppercase character: U+0041 ‘A’ ..= U+005A ‘Z’.

§Examples
let uppercase_a = b'A';
let uppercase_g = b'G';
let a = b'a';
let g = b'g';
let zero = b'0';
let percent = b'%';
let space = b' ';
let lf = b'\n';
let esc = b'\x1b';

assert!(uppercase_a.is_ascii_uppercase());
assert!(uppercase_g.is_ascii_uppercase());
assert!(!a.is_ascii_uppercase());
assert!(!g.is_ascii_uppercase());
assert!(!zero.is_ascii_uppercase());
assert!(!percent.is_ascii_uppercase());
assert!(!space.is_ascii_uppercase());
assert!(!lf.is_ascii_uppercase());
assert!(!esc.is_ascii_uppercase());
1.24.0 · Source

pub fn is_ascii_lowercase(&self) -> bool

Checks if the value is an ASCII lowercase character: U+0061 ‘a’ ..= U+007A ‘z’.

§Examples
let uppercase_a = b'A';
let uppercase_g = b'G';
let a = b'a';
let g = b'g';
let zero = b'0';
let percent = b'%';
let space = b' ';
let lf = b'\n';
let esc = b'\x1b';

assert!(!uppercase_a.is_ascii_lowercase());
assert!(!uppercase_g.is_ascii_lowercase());
assert!(a.is_ascii_lowercase());
assert!(g.is_ascii_lowercase());
assert!(!zero.is_ascii_lowercase());
assert!(!percent.is_ascii_lowercase());
assert!(!space.is_ascii_lowercase());
assert!(!lf.is_ascii_lowercase());
assert!(!esc.is_ascii_lowercase());
1.24.0 · Source

pub fn is_ascii_alphanumeric(&self) -> bool

Checks if the value is an ASCII alphanumeric character:

  • U+0041 ‘A’ ..= U+005A ‘Z’, or
  • U+0061 ‘a’ ..= U+007A ‘z’, or
  • U+0030 ‘0’ ..= U+0039 ‘9’.
§Examples
let uppercase_a = b'A';
let uppercase_g = b'G';
let a = b'a';
let g = b'g';
let zero = b'0';
let percent = b'%';
let space = b' ';
let lf = b'\n';
let esc = b'\x1b';

assert!(uppercase_a.is_ascii_alphanumeric());
assert!(uppercase_g.is_ascii_alphanumeric());
assert!(a.is_ascii_alphanumeric());
assert!(g.is_ascii_alphanumeric());
assert!(zero.is_ascii_alphanumeric());
assert!(!percent.is_ascii_alphanumeric());
assert!(!space.is_ascii_alphanumeric());
assert!(!lf.is_ascii_alphanumeric());
assert!(!esc.is_ascii_alphanumeric());
1.24.0 · Source

pub fn is_ascii_digit(&self) -> bool

Checks if the value is an ASCII decimal digit: U+0030 ‘0’ ..= U+0039 ‘9’.

§Examples
let uppercase_a = b'A';
let uppercase_g = b'G';
let a = b'a';
let g = b'g';
let zero = b'0';
let percent = b'%';
let space = b' ';
let lf = b'\n';
let esc = b'\x1b';

assert!(!uppercase_a.is_ascii_digit());
assert!(!uppercase_g.is_ascii_digit());
assert!(!a.is_ascii_digit());
assert!(!g.is_ascii_digit());
assert!(zero.is_ascii_digit());
assert!(!percent.is_ascii_digit());
assert!(!space.is_ascii_digit());
assert!(!lf.is_ascii_digit());
assert!(!esc.is_ascii_digit());
Source

pub fn is_ascii_octdigit(&self) -> bool

🔬This is a nightly-only experimental API. (is_ascii_octdigit)

Checks if the value is an ASCII octal digit: U+0030 ‘0’ ..= U+0037 ‘7’.

§Examples
#![feature(is_ascii_octdigit)]

let uppercase_a = b'A';
let a = b'a';
let zero = b'0';
let seven = b'7';
let nine = b'9';
let percent = b'%';
let lf = b'\n';

assert!(!uppercase_a.is_ascii_octdigit());
assert!(!a.is_ascii_octdigit());
assert!(zero.is_ascii_octdigit());
assert!(seven.is_ascii_octdigit());
assert!(!nine.is_ascii_octdigit());
assert!(!percent.is_ascii_octdigit());
assert!(!lf.is_ascii_octdigit());
1.24.0 · Source

pub fn is_ascii_hexdigit(&self) -> bool

Checks if the value is an ASCII hexadecimal digit:

  • U+0030 ‘0’ ..= U+0039 ‘9’, or
  • U+0041 ‘A’ ..= U+0046 ‘F’, or
  • U+0061 ‘a’ ..= U+0066 ‘f’.
§Examples
let uppercase_a = b'A';
let uppercase_g = b'G';
let a = b'a';
let g = b'g';
let zero = b'0';
let percent = b'%';
let space = b' ';
let lf = b'\n';
let esc = b'\x1b';

assert!(uppercase_a.is_ascii_hexdigit());
assert!(!uppercase_g.is_ascii_hexdigit());
assert!(a.is_ascii_hexdigit());
assert!(!g.is_ascii_hexdigit());
assert!(zero.is_ascii_hexdigit());
assert!(!percent.is_ascii_hexdigit());
assert!(!space.is_ascii_hexdigit());
assert!(!lf.is_ascii_hexdigit());
assert!(!esc.is_ascii_hexdigit());
1.24.0 · Source

pub fn is_ascii_punctuation(&self) -> bool

Checks if the value is an ASCII punctuation character:

  • U+0021 ..= U+002F ! " # $ % & ' ( ) * + , - . /, or
  • U+003A ..= U+0040 : ; < = > ? @, or
  • U+005B ..= U+0060 [ \ ] ^ _ `, or
  • U+007B ..= U+007E { | } ~
§Examples
let uppercase_a = b'A';
let uppercase_g = b'G';
let a = b'a';
let g = b'g';
let zero = b'0';
let percent = b'%';
let space = b' ';
let lf = b'\n';
let esc = b'\x1b';

assert!(!uppercase_a.is_ascii_punctuation());
assert!(!uppercase_g.is_ascii_punctuation());
assert!(!a.is_ascii_punctuation());
assert!(!g.is_ascii_punctuation());
assert!(!zero.is_ascii_punctuation());
assert!(percent.is_ascii_punctuation());
assert!(!space.is_ascii_punctuation());
assert!(!lf.is_ascii_punctuation());
assert!(!esc.is_ascii_punctuation());
1.24.0 · Source

pub fn is_ascii_graphic(&self) -> bool

Checks if the value is an ASCII graphic character: U+0021 ‘!’ ..= U+007E ‘~’.

§Examples
let uppercase_a = b'A';
let uppercase_g = b'G';
let a = b'a';
let g = b'g';
let zero = b'0';
let percent = b'%';
let space = b' ';
let lf = b'\n';
let esc = b'\x1b';

assert!(uppercase_a.is_ascii_graphic());
assert!(uppercase_g.is_ascii_graphic());
assert!(a.is_ascii_graphic());
assert!(g.is_ascii_graphic());
assert!(zero.is_ascii_graphic());
assert!(percent.is_ascii_graphic());
assert!(!space.is_ascii_graphic());
assert!(!lf.is_ascii_graphic());
assert!(!esc.is_ascii_graphic());
1.24.0 · Source

pub fn is_ascii_whitespace(&self) -> bool

Checks if the value is an ASCII whitespace character: U+0020 SPACE, U+0009 HORIZONTAL TAB, U+000A LINE FEED, U+000C FORM FEED, or U+000D CARRIAGE RETURN.

Rust uses the WhatWG Infra Standard’s definition of ASCII whitespace. There are several other definitions in wide use. For instance, the POSIX locale includes U+000B VERTICAL TAB as well as all the above characters, but—from the very same specification—the default rule for “field splitting” in the Bourne shell considers only SPACE, HORIZONTAL TAB, and LINE FEED as whitespace.

If you are writing a program that will process an existing file format, check what that format’s definition of whitespace is before using this function.

§Examples
let uppercase_a = b'A';
let uppercase_g = b'G';
let a = b'a';
let g = b'g';
let zero = b'0';
let percent = b'%';
let space = b' ';
let lf = b'\n';
let esc = b'\x1b';

assert!(!uppercase_a.is_ascii_whitespace());
assert!(!uppercase_g.is_ascii_whitespace());
assert!(!a.is_ascii_whitespace());
assert!(!g.is_ascii_whitespace());
assert!(!zero.is_ascii_whitespace());
assert!(!percent.is_ascii_whitespace());
assert!(space.is_ascii_whitespace());
assert!(lf.is_ascii_whitespace());
assert!(!esc.is_ascii_whitespace());
1.24.0 · Source

pub fn is_ascii_control(&self) -> bool

Checks if the value is an ASCII control character: U+0000 NUL ..= U+001F UNIT SEPARATOR, or U+007F DELETE. Note that most ASCII whitespace characters are control characters, but SPACE is not.

§Examples
let uppercase_a = b'A';
let uppercase_g = b'G';
let a = b'a';
let g = b'g';
let zero = b'0';
let percent = b'%';
let space = b' ';
let lf = b'\n';
let esc = b'\x1b';

assert!(!uppercase_a.is_ascii_control());
assert!(!uppercase_g.is_ascii_control());
assert!(!a.is_ascii_control());
assert!(!g.is_ascii_control());
assert!(!zero.is_ascii_control());
assert!(!percent.is_ascii_control());
assert!(!space.is_ascii_control());
assert!(lf.is_ascii_control());
assert!(esc.is_ascii_control());

Trait Implementations§

Source§

impl BinProtRead for Char

Source§

fn binprot_read<R: Read + ?Sized>(r: &mut R) -> Result<Self, Error>
where Self: Sized,

Source§

impl BinProtWrite for Char

Source§

impl Clone for Char

Source§

fn clone(&self) -> Char

Returns a duplicate of the value. Read more
1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl Debug for Char

Source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
Source§

impl<'de> Deserialize<'de> for Char

Source§

fn deserialize<D>(deserializer: D) -> Result<Self, D::Error>
where D: Deserializer<'de>,

Deserialize this value from the given Serde deserializer. Read more
Source§

impl From<Char> for u8

Source§

fn from(source: Char) -> Self

Converts to this type from the input type.
Source§

impl From<u8> for Char

Source§

fn from(source: u8) -> Self

Converts to this type from the input type.
Source§

impl Ord for Char

Source§

fn cmp(&self, other: &Char) -> Ordering

This method returns an Ordering between self and other. Read more
1.21.0 · Source§

fn max(self, other: Self) -> Self
where Self: Sized,

Compares and returns the maximum of two values. Read more
1.21.0 · Source§

fn min(self, other: Self) -> Self
where Self: Sized,

Compares and returns the minimum of two values. Read more
1.50.0 · Source§

fn clamp(self, min: Self, max: Self) -> Self
where Self: Sized,

Restrict a value to a certain interval. Read more
Source§

impl PartialEq for Char

Source§

fn eq(&self, other: &Char) -> bool

Tests for self and other values to be equal, and is used by ==.
1.0.0 · Source§

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
Source§

impl PartialOrd for Char

Source§

fn partial_cmp(&self, other: &Char) -> Option<Ordering>

This method returns an ordering between self and other values if one exists. Read more
1.0.0 · Source§

fn lt(&self, other: &Rhs) -> bool

Tests less than (for self and other) and is used by the < operator. Read more
1.0.0 · Source§

fn le(&self, other: &Rhs) -> bool

Tests less than or equal to (for self and other) and is used by the <= operator. Read more
1.0.0 · Source§

fn gt(&self, other: &Rhs) -> bool

Tests greater than (for self and other) and is used by the > operator. Read more
1.0.0 · Source§

fn ge(&self, other: &Rhs) -> bool

Tests greater than or equal to (for self and other) and is used by the >= operator. Read more
Source§

impl Serialize for Char

Source§

fn serialize<S>(&self, serializer: S) -> Result<S::Ok, S::Error>
where S: Serializer,

Serialize this value into the given Serde serializer. Read more
Source§

impl Deref for Char

Source§

type Target = u8

The resulting type after dereferencing.
Source§

fn deref(&self) -> &Self::Target

Dereferences the value.
Source§

impl Copy for Char

Source§

impl Eq for Char

Source§

impl StructuralPartialEq for Char

Auto Trait Implementations§

§

impl Freeze for Char

§

impl RefUnwindSafe for Char

§

impl Send for Char

§

impl Sync for Char

§

impl Unpin for Char

§

impl UnwindSafe for Char

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
§

impl<T> BinProtSize for T
where T: BinProtWrite,

§

fn binprot_size(&self) -> usize

Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dest. Read more
§

impl<Q, K> Comparable<K> for Q
where Q: Ord + ?Sized, K: Borrow<Q> + ?Sized,

§

fn compare(&self, key: &K) -> Ordering

Compare self to key and return their ordering.
§

impl<T> Conv for T

§

fn conv<T>(self) -> T
where Self: Into<T>,

Converts self into T using Into<T>. Read more
§

impl<Q, K> Equivalent<K> for Q
where Q: Eq + ?Sized, K: Borrow<Q> + ?Sized,

§

fn equivalent(&self, key: &K) -> bool

Compare self to key and return true if they are equal.
§

impl<T> FmtForward for T

§

fn fmt_binary(self) -> FmtBinary<Self>
where Self: Binary,

Causes self to use its Binary implementation when Debug-formatted.
§

fn fmt_display(self) -> FmtDisplay<Self>
where Self: Display,

Causes self to use its Display implementation when Debug-formatted.
§

fn fmt_lower_exp(self) -> FmtLowerExp<Self>
where Self: LowerExp,

Causes self to use its LowerExp implementation when Debug-formatted.
§

fn fmt_lower_hex(self) -> FmtLowerHex<Self>
where Self: LowerHex,

Causes self to use its LowerHex implementation when Debug-formatted.
§

fn fmt_octal(self) -> FmtOctal<Self>
where Self: Octal,

Causes self to use its Octal implementation when Debug-formatted.
§

fn fmt_pointer(self) -> FmtPointer<Self>
where Self: Pointer,

Causes self to use its Pointer implementation when Debug-formatted.
§

fn fmt_upper_exp(self) -> FmtUpperExp<Self>
where Self: UpperExp,

Causes self to use its UpperExp implementation when Debug-formatted.
§

fn fmt_upper_hex(self) -> FmtUpperHex<Self>
where Self: UpperHex,

Causes self to use its UpperHex implementation when Debug-formatted.
§

fn fmt_list(self) -> FmtList<Self>
where &'a Self: for<'a> IntoIterator,

Formats each item in a sequence. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T> FromBinProtStream for T
where T: BinProtRead,

Source§

fn read_from_stream<R>(r: &mut R) -> Result<Self, Error>
where R: Read,

Decodes bytes from reader of byte stream into the specified type T. This function assumes that the data is prepended with 8-bytes little endian integer specirying the size. Read more
Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

§

impl<T> Pipe for T
where T: ?Sized,

§

fn pipe<R>(self, func: impl FnOnce(Self) -> R) -> R
where Self: Sized,

Pipes by value. This is generally the method you want to use. Read more
§

fn pipe_ref<'a, R>(&'a self, func: impl FnOnce(&'a Self) -> R) -> R
where R: 'a,

Borrows self and passes that borrow into the pipe function. Read more
§

fn pipe_ref_mut<'a, R>(&'a mut self, func: impl FnOnce(&'a mut Self) -> R) -> R
where R: 'a,

Mutably borrows self and passes that borrow into the pipe function. Read more
§

fn pipe_borrow<'a, B, R>(&'a self, func: impl FnOnce(&'a B) -> R) -> R
where Self: Borrow<B>, B: 'a + ?Sized, R: 'a,

Borrows self, then passes self.borrow() into the pipe function. Read more
§

fn pipe_borrow_mut<'a, B, R>( &'a mut self, func: impl FnOnce(&'a mut B) -> R, ) -> R
where Self: BorrowMut<B>, B: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.borrow_mut() into the pipe function. Read more
§

fn pipe_as_ref<'a, U, R>(&'a self, func: impl FnOnce(&'a U) -> R) -> R
where Self: AsRef<U>, U: 'a + ?Sized, R: 'a,

Borrows self, then passes self.as_ref() into the pipe function.
§

fn pipe_as_mut<'a, U, R>(&'a mut self, func: impl FnOnce(&'a mut U) -> R) -> R
where Self: AsMut<U>, U: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.as_mut() into the pipe function.
§

fn pipe_deref<'a, T, R>(&'a self, func: impl FnOnce(&'a T) -> R) -> R
where Self: Deref<Target = T>, T: 'a + ?Sized, R: 'a,

Borrows self, then passes self.deref() into the pipe function.
§

fn pipe_deref_mut<'a, T, R>( &'a mut self, func: impl FnOnce(&'a mut T) -> R, ) -> R
where Self: DerefMut<Target = T> + Deref, T: 'a + ?Sized, R: 'a,

Mutably borrows self, then passes self.deref_mut() into the pipe function.
§

impl<T> Pointable for T

§

const ALIGN: usize

The alignment of pointer.
§

type Init = T

The type for initializers.
§

unsafe fn init(init: <T as Pointable>::Init) -> usize

Initializes a with the given initializer. Read more
§

unsafe fn deref<'a>(ptr: usize) -> &'a T

Dereferences the given pointer. Read more
§

unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T

Mutably dereferences the given pointer. Read more
§

unsafe fn drop(ptr: usize)

Drops the object pointed to by the given pointer. Read more
Source§

impl<P, T> Receiver for P
where P: Deref<Target = T> + ?Sized, T: ?Sized,

Source§

type Target = T

🔬This is a nightly-only experimental API. (arbitrary_self_types)
The target type on which the method may be called.
Source§

impl<T> Same for T

Source§

type Output = T

Should always be Self
§

impl<T> Tap for T

§

fn tap(self, func: impl FnOnce(&Self)) -> Self

Immutable access to a value. Read more
§

fn tap_mut(self, func: impl FnOnce(&mut Self)) -> Self

Mutable access to a value. Read more
§

fn tap_borrow<B>(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow<B>, B: ?Sized,

Immutable access to the Borrow<B> of a value. Read more
§

fn tap_borrow_mut<B>(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut<B>, B: ?Sized,

Mutable access to the BorrowMut<B> of a value. Read more
§

fn tap_ref<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Immutable access to the AsRef<R> view of a value. Read more
§

fn tap_ref_mut<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Mutable access to the AsMut<R> view of a value. Read more
§

fn tap_deref<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Immutable access to the Deref::Target of a value. Read more
§

fn tap_deref_mut<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Mutable access to the Deref::Target of a value. Read more
§

fn tap_dbg(self, func: impl FnOnce(&Self)) -> Self

Calls .tap() only in debug builds, and is erased in release builds.
§

fn tap_mut_dbg(self, func: impl FnOnce(&mut Self)) -> Self

Calls .tap_mut() only in debug builds, and is erased in release builds.
§

fn tap_borrow_dbg<B>(self, func: impl FnOnce(&B)) -> Self
where Self: Borrow<B>, B: ?Sized,

Calls .tap_borrow() only in debug builds, and is erased in release builds.
§

fn tap_borrow_mut_dbg<B>(self, func: impl FnOnce(&mut B)) -> Self
where Self: BorrowMut<B>, B: ?Sized,

Calls .tap_borrow_mut() only in debug builds, and is erased in release builds.
§

fn tap_ref_dbg<R>(self, func: impl FnOnce(&R)) -> Self
where Self: AsRef<R>, R: ?Sized,

Calls .tap_ref() only in debug builds, and is erased in release builds.
§

fn tap_ref_mut_dbg<R>(self, func: impl FnOnce(&mut R)) -> Self
where Self: AsMut<R>, R: ?Sized,

Calls .tap_ref_mut() only in debug builds, and is erased in release builds.
§

fn tap_deref_dbg<T>(self, func: impl FnOnce(&T)) -> Self
where Self: Deref<Target = T>, T: ?Sized,

Calls .tap_deref() only in debug builds, and is erased in release builds.
§

fn tap_deref_mut_dbg<T>(self, func: impl FnOnce(&mut T)) -> Self
where Self: DerefMut<Target = T> + Deref, T: ?Sized,

Calls .tap_deref_mut() only in debug builds, and is erased in release builds.
Source§

impl<T> ToOwned for T
where T: Clone,

Source§

type Owned = T

The resulting type after obtaining ownership.
Source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
Source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
§

impl<T> TryConv for T

§

fn try_conv<T>(self) -> Result<T, Self::Error>
where Self: TryInto<T>,

Attempts to convert self into T using TryInto<T>. Read more
Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
§

impl<V, T> VZip<V> for T
where V: MultiLane<T>,

§

fn vzip(self) -> V

Source§

impl<T> DeserializeOwned for T
where T: for<'de> Deserialize<'de>,